Description
*Battery (TT-BT-18650) is not included with Nucleus-M Full Kit and Partial Kit.
Nucleus-M is a revolutionary and highly customizable 3-channel wireless lens control system.
Partial Kit 2 includes Right wireless handle x1 and Motor x1.
Full control of focus, iris and zoom is possible between the FIZ hand unit or two wireless hand grips.
You can also split channels between the hand unit and the wireless handgrip for control at the touch of a button.
The wireless communication distance between the hand unit and hand grip is approximately 300m.
The handgrip can be attached to the included rosette mount and operated handheld, or used as a top bar base gimbal with the included Nucleus-M handgrip/gimbal adapter, or as a ring-based gimbal with the optional Nucleus-M handgrip/gimbal ring adapter. It can be installed.
Each motor contains its own motor drive that communicates directly with the hand unit and handgrip. This eliminates the need to install a separate MDR on your rig, allowing for a more compact camera setup and faster setup times.
Simply set the motor and hand unit/hand grip to the same channel for full control.
The motor allows automatic calibration of the lens and manual calibration if you are using a lens that does not have a hard end stop at close focus and infinity.
The motor is designed to clamp to a 19mm or 15mm rod (using the included rod bushing).
This clamp-on design allows you to easily install and remove the motor without having to remove other accessories from your setup.
All motors are installed with 0.8 Mod, 35 Tooth, 32 Pitch. This is the standard gear size for cinema lenses.
The Nucleus-M Motor has a torque of 2.5Nm at 14.8V.
Powering the motor requires using only one power port on the camera rig. Simply plug the P-tap power cable into one of the motors and daisy chain the power to the remaining motors with a short 7-pin to 7-pin cable.
Power can be supplied to the motor from a power source capable of outputting a voltage of 7.2V to 24V.
The hand unit and hand grip are each powered by two 18650 batteries (sold separately).
The hand grip battery lasts up to 2 days on a full charge, and the hand unit battery lasts up to 10 hours.
Remote start/stop is possible by connecting the Nucleus-M R/S cable to an open 7-pin port on the motor. This allows R/S from the hand unit or handle.
[Bundled items]
1: Nucleus-M Handgrip (Right) (WLC-T03-HR)*1
2: Nucleus M Motor (WLC-T03-M)*1
3: Photographic Lens Follow Focus Gear Ring (FR-T03)*1
4: Nucleus-M 7-Pin to 7-Pin Motor to Motor Connection Cable (Straight) 55cm (WLC-T03-7P-S-55) *1
5: Nucleus-M P-TAP to 7-Pin Motor Power Cable (WLC-T03-PTAP-7P)*1
6: Nucleus-M Handle Grip Mount to Arri Standard Rosette Adapter (L/R) (WLC-T03-RS)*1
7: Alley key (199-000000-009) *1
8：Instruction manual*1
9：Warranty card*1
10：Carton box*1
11:Soft safety package (WLC-T03-SCC2)*1
12: Nucleus M Dual battery charger (WLC-T03-BC2) *1
About delivery date
*Products displayed as "In stock" can be shipped on the same day at the earliest, but due to reasons such as a concentration of orders in a short period of time, the product may not be available. If the item you ordered is out of stock, we will contact you immediately regarding the delivery date.
*For back-ordered items, it may take approximately one week from ordering to shipping. If further delays occur due to manufacturer shortages, etc., we will contact you without delay. Please note that in the event of unavoidable circumstances such as discontinuation of production, we will cancel your order.
製品の仕様・画像について
※製品の仕様・外観はメーカーによる改良等の為、予告なく変更されることがあります。
メーカーホームページ等で最新の情報をご確認いただき、ご不明な点や相違がある場合は事前にお問い合わせください。
ご注文後の、キャンセル・変更は承りかねます。
※商品ページの画像で使用されている他の製品は、付属品等に記載されている場合を除き含まれません。