Description
The Hydra Predator Car Mounting System was designed from the ground up to enable lightweight car-mounted cinematography when used in conjunction with small gimbals.
This kit is based on the new Predator Rail Mounting Attachment, which allows you to secure the Hydra Alien's arm to a 2-inch speed rail. This gives you greater freedom of installation on your vehicle, allowing you to rig your vehicle to suit your specific needs or attach the system to structures where 2-inch rails already exist.
The system features a shock-absorbing arm to make the camera more stable for certain shots, and a spring-loaded cradle head for when you need to shoot with the gimbal upside down.
The included hydraulic damper pole further stabilizes the arm and allows for smooth shooting even in poor driving conditions.
This kit includes an RS 2 remote control kit that allows you to control DJI RS 2 wired or wirelessly, and a Hydra Alien monitor bracket that allows you to easily monitor and control your RS 2.
Hydra Predator also supports full wireless control of the RS 2 via the Control Kit, which allows you to control the RS 2 gimbal's settings as well as the camera's recording and photo functions over a wired or wireless connection. Masu.
Additionally, this controller features thumbsticks that allow you to control the gimbal's pan and tilt for maximum precision during operation.
The dedicated case is designed to be lightweight and compact while storing and protecting the Hydra Predator system.
High, low. Attach it to the side or above your car...the Hydra Predator Car Mounting System allows you to configure most car mounting shots.
Note: This system is compatible with gimbals that can be mounted with 1/4″-20 screws and powered with P-Tap.
The remote control handle is only compatible with RS2.
[Bundled items]
1: Hydra Alien Rail Mounting Attachment (HDA-T05-RMA)*1
2: Hydra Alien Shock Absorbing Arm (HDA-T02-SAA) *1
3: Power Supply Base Plate for RS 2 (TGA-PBP)*1
4:Remote Control Receiver Module for RS 2(TGA-RCR)*1
5:Remote Control Handle for RS 2/Ronin S (TGA-RCH)*1
6: 6-Pin Lemo to 6-Pin Lemo Cable (500 cm)(TCB-6LE-6LE-500)*1
7: Hydra Dual Battery Plate Cradle Head – V Mount (HDA-BCH-V)*1
1: Hydra Alien V-Mount Battery Plate(HDA-T02-BP-V)*2
2: Hydra Alien 90 Degree Adapter for Shock Absorbing Head (HDA-T02-ASA)*1
3: Hydra Alien Shock Absorbing Head (HDA-T02-SAH)*1
4: Hydra Alien Dual Battery Plate Support Bracket (HDA-T02-DPS) *1 are included
8: 220g Counterweight (TGA-CW-220)*8pcs
9: Hydra Alien Cable Clamp Suction Cup (HDA-T02-CSC) *1set (10pcs/set)
10: Hydra Alien Monitor Bracket (HDA-T02-MB)*1
11: Tool Kit for Hydra Predator Shock Absorbing Arm (HDA-T05-TK)*1
12: Hydra Predator Shock Absorbing Arm Hard Shell Waterproof Safety Case (HDA-T05-WSC) *1
[Technical Data]
Dimensions: 19.5 x 9.5 x 17.5 inches
Weight: 25lbs
Net Weight: 10lbs
Materials: Aluminum alloy, stainless steel
Color: Black
*Note: The rail, battery, camera, gimbal, etc. in the image used are not included. Please check the included items for details.
*Note: Please note that product design, specifications, and appearance are subject to change without notice.
*Although the contents of V-mount compatible products and gold mount compatible products are different, we have provided common images and product descriptions.
This kit is based on the new Predator Rail Mounting Attachment, which allows you to secure the Hydra Alien's arm to a 2-inch speed rail. This gives you greater freedom of installation on your vehicle, allowing you to rig your vehicle to suit your specific needs or attach the system to structures where 2-inch rails already exist.
The system features a shock-absorbing arm to make the camera more stable for certain shots, and a spring-loaded cradle head for when you need to shoot with the gimbal upside down.
The included hydraulic damper pole further stabilizes the arm and allows for smooth shooting even in poor driving conditions.
This kit includes an RS 2 remote control kit that allows you to control DJI RS 2 wired or wirelessly, and a Hydra Alien monitor bracket that allows you to easily monitor and control your RS 2.
Hydra Predator also supports full wireless control of the RS 2 via the Control Kit, which allows you to control the RS 2 gimbal's settings as well as the camera's recording and photo functions over a wired or wireless connection. Masu.
Additionally, this controller features thumbsticks that allow you to control the gimbal's pan and tilt for maximum precision during operation.
The dedicated case is designed to be lightweight and compact while storing and protecting the Hydra Predator system.
High, low. Attach it to the side or above your car...the Hydra Predator Car Mounting System allows you to configure most car mounting shots.
Note: This system is compatible with gimbals that can be mounted with 1/4″-20 screws and powered with P-Tap.
The remote control handle is only compatible with RS2.
[Bundled items]
1: Hydra Alien Rail Mounting Attachment (HDA-T05-RMA)*1
2: Hydra Alien Shock Absorbing Arm (HDA-T02-SAA) *1
3: Power Supply Base Plate for RS 2 (TGA-PBP)*1
4:Remote Control Receiver Module for RS 2(TGA-RCR)*1
5:Remote Control Handle for RS 2/Ronin S (TGA-RCH)*1
6: 6-Pin Lemo to 6-Pin Lemo Cable (500 cm)(TCB-6LE-6LE-500)*1
7: Hydra Dual Battery Plate Cradle Head – V Mount (HDA-BCH-V)*1
1: Hydra Alien V-Mount Battery Plate(HDA-T02-BP-V)*2
2: Hydra Alien 90 Degree Adapter for Shock Absorbing Head (HDA-T02-ASA)*1
3: Hydra Alien Shock Absorbing Head (HDA-T02-SAH)*1
4: Hydra Alien Dual Battery Plate Support Bracket (HDA-T02-DPS) *1 are included
8: 220g Counterweight (TGA-CW-220)*8pcs
9: Hydra Alien Cable Clamp Suction Cup (HDA-T02-CSC) *1set (10pcs/set)
10: Hydra Alien Monitor Bracket (HDA-T02-MB)*1
11: Tool Kit for Hydra Predator Shock Absorbing Arm (HDA-T05-TK)*1
12: Hydra Predator Shock Absorbing Arm Hard Shell Waterproof Safety Case (HDA-T05-WSC) *1
[Technical Data]
Dimensions: 19.5 x 9.5 x 17.5 inches
Weight: 25lbs
Net Weight: 10lbs
Materials: Aluminum alloy, stainless steel
Color: Black
*Note: The rail, battery, camera, gimbal, etc. in the image used are not included. Please check the included items for details.
*Note: Please note that product design, specifications, and appearance are subject to change without notice.
*Although the contents of V-mount compatible products and gold mount compatible products are different, we have provided common images and product descriptions.
About delivery date
*Products displayed as "In stock" can be shipped on the same day at the earliest, but due to reasons such as a concentration of orders in a short period of time, the product may not be available. If the item you ordered is out of stock, we will contact you immediately regarding the delivery date.
*For back-ordered items, it may take approximately one week from ordering to shipping. If further delays occur due to manufacturer shortages, etc., we will contact you without delay. Please note that in the event of unavoidable circumstances such as discontinuation of production, we will cancel your order.
製品の仕様・画像について
※製品の仕様・外観はメーカーによる改良等の為、予告なく変更されることがあります。
メーカーホームページ等で最新の情報をご確認いただき、ご不明な点や相違がある場合は事前にお問い合わせください。
ご注文後の、キャンセル・変更は承りかねます。
※商品ページの画像で使用されている他の製品は、付属品等に記載されている場合を除き含まれません。