RODE Wireless PRO Wireless Microphone WIPRO

Advanced Wireless Microphone System Wireless Pro is a dual-channel wireless microphone system with two transmitters with built-in high-quality microphones and one receiver that connects to your photography equipment.
You can clearly capture the speaker's voice and easily record high-quality sound without being tied down by troublesome audio cables.

You can select the recording mode: merge mode, which records the output from two transmitters together, or split mode, which records the output of each transmitter into separate left and right channels.

Transmission between the transmitter and receiver uses RODE's state-of-the-art Series IV 2.4GHz digital transmission and near-zero latency codec with 128bit encryption, providing clear and stable audio transmission up to 260m (line of sight).

It is also compatible with "Wireless Go II" and "Wireless Me" from the same series, which use digital transmission, so it is possible to pair by swapping the transmitter/receiver combinations for each.

It can also be connected to RODE's audio interface products ``Roadcaster Pro II'', ``Roadcaster Duo'', and ``Streamer X''.
Both the transmitter and receiver can be operated for up to 7 hours, and the transmitter's remaining battery level and transmission status can be checked on the receiver's LCD monitor for peace of mind.

32-bit float on-board recording is possible without sound cracking. Each transmitter is equipped with 32 GB of internal memory, and it is possible to record audio from the transmitter alone while transmitting audio to the receiver.
Furthermore, onboard recording supports recording at a bit rate of 32bit float*.
Gain adjustment during recording is no longer necessary, and gain can be adjusted during post-recording editing, making it easy to avoid sound distortion.

Onboard recording can be switched to either a mode that records continuously during startup (Always) or a mode that allows you to start recording by pressing the REC button on the transmitter (Manual).
Even when not connected to a receiver, more than 40 hours of recorded data can be saved in the internal memory in 32-bit float, making it a convenient function for backup in case of audio transmission problems.
Alternatively, you can use the transmitter alone as a recorder.
*Receiver digital output does not support 32bit float

Timecode output for smooth post-production The timecode that can be output from the receiver makes it easy to synchronize audio and video during the editing flow.
Since timecode can be output as an audio signal in LTC format from the 3.5mm TRS terminal and USB-C terminal, it is compatible not only with timecode compatible devices but also with devices that cannot save timecode as metadata, such as mirrorless single-lens cameras. .

You can select from five patterns* for assigning the output audio and time code to the LR of each terminal, and it is also possible to jam sync multiple devices by outputting only the time code.
Of course, the timecode is also synchronized to the transmitter.
In the unlikely event that the connection with the receiver is lost, the transmitter's time code will continue to free-run, so it will automatically synchronize when reconnected.
*When outputting timecode, recording in split mode is not possible.

Easily record clear recordings in any situation
In addition to 32bit float onboard recording, it also features a "gain assist function" and a "safety channel function."
The gain assist function automatically adjusts the input gain to the appropriate level, making loud sounds quieter and quiet sounds louder, making it easy to record sounds that are easy to hear at any time.
The output gain from the 3.5mm TRS terminal can be finely adjusted manually in 3dB increments, and there are also preset gain settings to match the camera, etc., so you can easily manage the gain appropriately.
The safety channel function* outputs a backup sound source that lowers all input audio by -10dB from the right channel. Even if a sudden loud sound or unexpected noise occurs, you can avoid problems caused by sound distortion by using a backup sound source when editing.
*Available in merge mode only

Can be connected to a variety of devices In addition to a 3.5mm TRS cable for analog connection of the receiver (RX) to the camera, a USB-C cable and Lightning cable necessary for digital connection to a PC or smartphone are also included.

For example, during webinars or online meetings, you can deliver clear audio with the gain assist function adjusted to the appropriate volume without worrying about the length of the cable when connected to a PC.
On smartphones, you can use a camera app* that supports external audio input, and on iOS devices, you can use the wireless pro more conveniently with the camera app "RODE Capture." With RODE Capture, you can change various settings of Wireless Pro from within the app, and you can also record the main camera and in-camera simultaneously.

In addition, by using apps such as RODE Central, you can change various settings that cannot be done with the Wireless Pro itself.
In addition, a headset can be connected to the 3.5mm TRRS terminal installed on the receiver (RX), and in addition to monitoring audio from the transmitter (TX), input audio from the headset can be added as a third channel. Masu.

*Some Android devices may not support external audio input with the standard camera app. Compatibility status varies depending on the model, so please check each model.
Everything you need for wireless recording in one package A wide variety of accessories are included in the package, allowing you to use Wireless Pro in a variety of recording situations and styles.
In addition to the transmitter/receiver body, a charging communication case for the body, a magnetic clip, two lavalier microphones, connection cables for various devices, and a case to store accessories are also included.

The charging communication case "Charge Case Pro" is a storage case with a built-in battery that can fully charge the transmitter and receiver up to two times, allowing you to safely carry the transmitter and receiver while charging them all at once. In addition to charging, it can also communicate with a PC via wire, so you can easily change various settings and output onboard recording data with a single cable while still in the case.

The lavalier microphone "Lavalier II" is compatible with a locking connector that prevents the cable from falling out, making it useful in situations where you want to make clear recordings without making the microphone stand out.
It also comes with a windshield for Lavalier II, so you can feel safe even when recording outdoors.

[Main Specifications]
Transmitting and receiving frequency: 2.4GHz
Transmission distance: Approximately 260m (line of sight) *May vary depending on the usage environment Time code standard: SMPTE
Timecode format: LTC
Timecode frame rate: 23.98fps, 24fps, 25fps, 29.97fps (drop frame), 29.97fps, 30fps
Battery life: Up to 7 hours Power source: Built-in lithium-ion battery (can be charged from USB-C terminal (5V/0.4A))
System requirements: MacOS 10.15 or later, Windows 10 or later, iOS 14 or later, Android 11 or later Compatible RODE apps: RODE Central, RODE Connect, UNIFY, RODE Central Mobile, RODE Reporter, RODE Capture

[Kit contents]
Transmitter (TX) x 2, Receiver (RX) x 1, Charge Case Pro x 1, SC2 (3.5mm TRS - TRS cable) x 1, SC21 (USB-C - Lightning cable) x 1, SC22 (USB- C to USB-C cable) x 1, USB-C to USB-C Super Speed ​​Cable x 1, Mag Clip Go x 2, Windshield (for Wireless Pro) x 3, Lavalier II x 2, Pop Filter (for Lavalier II) ) x 2, Microphone clip (for Lavalier II) x 2, Mini fur windshield (for Lavalier II) x 2, Color ID ring set (for Lavalier II) x 1, Accessory case x 1, Cleaning cloth x 1