Description
Using new technology, we have improved the problem of conventional 2.4GHz wireless systems where radio waves tend to drop out when used in crowded or poor visibility conditions in the 2.4GHz frequency band. Compact and easy to use, the PRO-XR is a high-quality, reliable wireless device suitable for use with digital SLR cameras, mirrorless cameras, smartphones, and other video creators.
Automatic scanning across frequency bands
When powered on, PRO-XR automatically scans the entire 2.4GHz frequency range and selects the most suitable frequency range while avoiding frequencies susceptible to radio wave interference.
Automatically avoid radio wave interference
When using PRO-XR, the environment in which surrounding 2.4GHz devices are used changes constantly. PRO-XR constantly monitors these usage environments, and when it detects radio wave interference at the frequency it is using, it automatically and repeatedly selects and uses a different frequency band.
Redundant audio technology In order to further increase the durability against radio wave interference, we have adopted Azden's proprietary "Signal Redundancy Technology" that transmits multiple signals from the transmitter to the receiver at different frequencies. If this technology detects interference with one radio wave, it can immediately switch to another signal and use it.
Two types of convenient external antennas are included While many digital wireless systems use built-in antennas, PRO-XR uses a more reliable external antenna. Two types of antennas are included for the transmitter. Flexible antennas are suitable for shooting when the transmitter is attached to the human body and emphasizes inconspicuousness and comfort, while high-output antennas are suitable for shooting at long distances or in environments with poor visibility, depending on the situation. You can use it properly.
When placing the transmitter behind the human body, bend the high-power antenna away from the human body at an angle of approximately 45 degrees for better communication performance.
The built-in lithium-ion battery has a battery life of 21 hours for the receiver and 15 hours for the transmitter, which is significantly longer than conventional products, allowing for extended use on the shoot. The newly adopted two-pronged charging cable allows simultaneous charging of the transmitter and receiver, and can be fully charged in about 2.5 hours.
Lavalier microphone / EX-507XR included as standard The newly adopted high-performance omnidirectional microphone can record the subject's voice with clear sound quality in the frequency response range from 20Hz to 20kHz. In addition, it uses a 3.5mm TRS plug shape and can be used with many wireless systems and recorders.
6-level volume adjustment The receiver is equipped with a φ3.5mm 3-pole jack for monitoring, and the audio output level can be adjusted in 6 levels.
AUX input is possible The 3.5mm AUX input on the transmitter allows audio input from mobile devices, etc.
*It becomes a thing inside the jack.
[Specifications (PRO-XR)]
Transmission/reception band: 2.4 GHz ISM Band
S/N ratio: 86dB
Dynamic range: MIC 90dB / AUX 87dB
Reception distance: 50m / line of sight standard distance Frequency characteristics: MIC 60 Hz – 20 kHz / AUX 30 Hz – 20 kHz
Bitrate: 384kbps
System latency: 6.8 ms
Number of battery charges: 500 times Rechargeable battery type: Li-ion, 3.7 V, 1200 mAh, 4.44 Wh
Power supply: USB 5V
[Specifications (EX507-XR)]
Format: Electret condenser Directivity: Omnidirectional Frequency response: 20 Hz - 20 kHz
Sensitivity: -38 dB @1 kHz, 0 dB=1 V/Pa
Impedance: 2.2 kΩ @1kHz
Power supply: Plug-in power DC 1-10V
Connector: Φ3.5 mm mono TRS
Cord length: 1.2m
About delivery date
*Products displayed as "In stock" can be shipped on the same day at the earliest, but due to reasons such as a concentration of orders in a short period of time, the product may not be available. If the item you ordered is out of stock, we will contact you immediately regarding the delivery date.
*For back-ordered items, it may take approximately one week from ordering to shipping. If further delays occur due to manufacturer shortages, etc., we will contact you without delay. Please note that in the event of unavoidable circumstances such as discontinuation of production, we will cancel your order.
製品の仕様・画像について
※製品の仕様・外観はメーカーによる改良等の為、予告なく変更されることがあります。
メーカーホームページ等で最新の情報をご確認いただき、ご不明な点や相違がある場合は事前にお問い合わせください。
ご注文後の、キャンセル・変更は承りかねます。
※商品ページの画像で使用されている他の製品は、付属品等に記載されている場合を除き含まれません。