Description
Mid-spreader type tripod system
This model is ideal for small handheld cameras such as mirrorless cameras, DSLRs, and Z90. Especially for shooting with a mirrorless camera, you can get the perfect balance from the lightest setup in combination with a kit lens.
Even with lightweight cameras such as α7, GH5, and R5, you can perform perfect camera work without compromise. We also support setup using simple rigs.
“Perfect balance” mechanism
Libec's stepless "perfect balance" feature ensures that the camera will stop at any tilt angle. When performing operations that require precision, such as close-up scenes, you are freed from the stress associated with spring bounce, and you can perform intuitive camera work at will.
The completely new head design has been significantly improved, resulting in a structure that prevents wobbling during panning and tilting due to aging, allowing for smoother start-up and cleaner stopping motion.
Counter Balance Meter A meter is installed that indicates the amount of tightening with a value from 0 to 100 so that you can see the strength of the spring at a glance. This function allows for easy setup at each site.
High-performance drag unit We have adopted a metal laminated unit for the drag system with an emphasis on operability, durability, and reliability. Using the highest grade silicone grease, it has a high-quality viscosity, and is smooth from start to finish, and backlash is suppressed to the utmost. It can be used in a temperature range of -40°C to +60°C and has excellent durability over time. There are 4 levels each including 0 (free) where there is no resistance. Unlike other companies' products, there is no need to set the drag dial to zero and store it.
Accessory ports for added convenience There are 1/4 and 3/8 inch accessory ports on the side of the head for attaching a monitor or light with an accessory arm. Since it is installed on the base, it does not affect the weight of the head, the height of the center of gravity, or the front-rear balance.
Dual head mechanism
It has a structure that allows it to be quickly attached to both 75mm ball tripods and flat base equipment, and can be attached to sliders, skater dollies, and even photo tripods.
Snap ON/OFF Plate
The slide plate can be attached to and detached from the head from the side with a single touch, allowing for comfortable and quick setup on the shooting site.
It is compatible with the highly compatible slide plate free-standing monopod TH-M and small tripod TH-X, and can also be used with some other companies' products. You can quickly transfer the camera to various equipment.
Level with LED The level has a built-in LED light so you can level it even in dark places. In addition, the LED illuminates not only the spirit level but also the counterbalance meter.
Safety design to prevent accidents The design is designed with the user's safety in mind, so that even if the legs drop suddenly, your fingers will not get caught.
[System configuration]
Head: H15
Tripod: RT30B
Spreader: BR-2B
Foot pad: FP-2B
Case: RC-30
[specification]
Counterbalance range: 0.5 ~ 2.5kg (CG55mm)
Maximum loading weight: 3kg
Counterbalance: Fully balanced Stepless counterbalance with meter Pandrag switching: 0+3 steps Tilt drag switching: 0+3 steps Drag mechanism: Metal laminated unit Tilt angle: +90° / -70°
Usable temperature: -40°C to +60°C
Level: LED illuminated Camera plate: Sliding plate Manfrotto / Sachtler compatible camera plate travel width: +/-30mm
Additional long plate: Optional head mounting: 75mm / flat base camera mounting: 1/4" screw + video boss accessory port: 1 each 1/4" screw hole and 3/8" screw hole Spare screw: 1/4" screw and 3/8" screw 1 piece each Weight: 5.9kg
Height: 81-166cm
Ball diameter: 75mm
Pipe material: aluminum Tripod number of stages: 3 stages
About delivery date
*Products displayed as "In stock" can be shipped on the same day at the earliest, but due to reasons such as a concentration of orders in a short period of time, the product may not be available. If the item you ordered is out of stock, we will contact you immediately regarding the delivery date.
*For back-ordered items, it may take approximately one week from ordering to shipping. If further delays occur due to manufacturer shortages, etc., we will contact you without delay. Please note that in the event of unavoidable circumstances such as discontinuation of production, we will cancel your order.
製品の仕様・画像について
※製品の仕様・外観はメーカーによる改良等の為、予告なく変更されることがあります。
メーカーホームページ等で最新の情報をご確認いただき、ご不明な点や相違がある場合は事前にお問い合わせください。
ご注文後の、キャンセル・変更は承りかねます。
※商品ページの画像で使用されている他の製品は、付属品等に記載されている場合を除き含まれません。